S-2.1, r. 14 - Regulation respecting occupational health and safety in mines

Schedule Disposition versions

2012-09-01

SCHEDULE II

(s. 269)

SIGNALS CODE

Signal                          Meaning                              Type of signal


 
1 bell........................  Stop immediately if                    Executive  
                                the hoist is in motion...............

1 bell following a              Hoist................................  Executive
destination signal............

3 bells - pause -               Hoist slowly.........................  Executive
3 bells - pause - 1 bell  

2 bells following a             Lower................................  Executive
destination signal............

3 bells - pause -               Lower slowly.........................  Executive
3 bells - pause - 2 bells.....

1 bell - pause - 2 bells......  Chairing and Unchairing..............  Executive

3 bells.......................  Men about to ascend or                 Cautionary  
                                descend hoisting conveyance..........

5 bells.......................  Release signal.......................  Cautionary

9 bells.......................  Danger signal........................  Cautionary

SHAFT SINKING/BUCKET

3 bells - pause - 1 bell......  Hoist................................  Executive,
                                                                       between the
                                                                       bottom of
                                                                       the shaft
                                                                       and the
                                                                       lower chair
																	  
3 bells - pause - 2 bells.....  Lower................................  Executive,
                                                                       between the
                                                                       lower chair
                                                                       and the
                                                                       bottom of
                                                                       the shaft.

    

O.C. 213-93, Sch. II; O.C. 42-2004, s. 31.